Tag: MPrime

Overclocking the Raspberry Pi 3: Thermal Limits and Optimising for Single vs Multicore Performance

Pragmatic Overclocking

Silicon Wafer - Image: GamersNexus.Net
Silicon Wafer – Image: GamersNexus.Net

Overclocking the Raspberry Pi 3 – Free Speed and Trade-offs

The Raspberry Pi 3, in common with the the older Pi 1 and Pi 2 models, can be overclocked – that is, the main processor, graphics chip, and memory, can be run faster than the default factory settings. Whilst more speed equals more processing power, there’s a trade-off to be considered with the new hardware that generally wasn’t an issue on the earlier systems.

Please Note: at time of writing overclocking the Pi 3 does not appear to be officially sanctioned. This is noted in a post on Gordons Projects, and can be seen in the overclocking entry in the Raspbian O/S’s raspi-config tool, which states ‘This Pi cannot be overclocked’. I do not know whether implementing any overclock options on the Pi 3 will set any internal flags and affect your warranty (early generation Pi’s do so if the Governor is bypassed). If in doubt, wait until the Raspberry Pi foundation makes a statement on the subject.

Raspi-Config Pi 3 - This Pi Cannot be Overclocked
Raspi-Config Pi 3 – This Pi Cannot be Overclocked

Nevertheless, the new Pi can certainly be overclocked. Whilst the process by which this is achieved remains the fundamentally the same, editing the config.txt file, overclocking is not quite as straightforward as it previously has been. The issue is one of thermodynamics, as the new model runs somewhat hotter than the those of the previous generations, at least in the case of the Pi which I took delivery of the day after the new model was released*

* The presence of high CPU temperatures on the new machine could be limited to a certain batch, or an example of the variations in CPU tolerances such as those resulting from lithographic techniques used to create the processors.

Raspberry Pi 3 within Camac Case, with PiHut Heatsink
Raspberry Pi 3 within Camac Case, with PiHut Heatsink

Continue reading →

Posted on by Retro Resolution 1

Overclocking and Stability Testing the Raspberry Pi 2 – Part 2: Stability Testing

Stability Testing an Overclocked Raspberry Pi
 

Checking that the system is reliable after applying overclocking

Overclocking is nothing without Stability. Image - www.wallpaper.ge/
Overclocking is nothing without Stability. Image – http://www.wallpaper.ge/

Following on from Part 1 of this post on Overclocking, we turn our attention to stability testing the system; this process is crucial, as simply witnessing the Pi boot to the command shell, or a Graphical User Interface (GUI) isn’t proof that a given combination of overclock settings is stable.

Sometimes an instability will only become apparent after several hours of intensive activity on the system (which is highly likely if using the system for gaming with an installation such as RetroPie).

There are three tools / scripts which I have used in the stability testing processes. For each I will provide instructions on obtaining and installing (or running, as appropriate):

  • MPrime.py
    – Python script to search for prime numbers, which heavily loads the CPU
    – User selectable numeric range to test
    – User selectable number of cores to run upon simultaneously.
  • Memtester
    – Tests the stability of the RAM
    – Natively runs on a single CPU core, but can be run on all cores using multiple remote SSH sessions, or the Screen tool
  • Stability Test Script
    – Reads the entire SD card 10x. Tests RAM and I/O
    – Writes 512 MB test file, 10x.
    – Script can be easily updated to change the number of reads/writes etc.

This post covers the use of mprime. Subsequent posts covers the use of Memtester and the Stability Test Script. Please use the links in the above list to access the relevant information.

Continue reading →

Posted on by Retro Resolution 4